Monday, June 20, 2022

My Old Rose Romantic Midi Dress AKA My Beautiful Tent

Hello doggy!

Earrings were made by my oldest daughter.


There has been an idea of this dress for a long time in my head but because there was no real need for it it hasn't come true up till now. I'm a teacher at primary school and our 9th graders had their junior prom (a conclusion of their years in primary school)  and that's the reason I decided to sew the dress. I made it in 3 days. Pretty quick if I'm motivated.

I chose a pattern from BurdaStyle 7/2015; mod. 110/111; size: 40 - it's a great pattern, simple but beautiful.

I used viscose jersey for the top part (bought in the Netherlands, here:https://driessenstoffen.nl/en/products/viscose-jersey-uni/ ) and chiffon for the skirt part and the sleeves (bought in Slovenia, here: https://svetmetraze.si/kategorija/pomlad-poletje-2022). I will try to calculate the costs. The skirt has a soft and flowy lining which is probably just some kind of polyester, also bought in Slovenia, actually together with chiffon fabric. It's a relatively good combination, as good as it gets. 

(MY USEFUL TIP TO MYSELF: buy fabric for lining whenever and wherever you have a chance because it can come in handy. So, I always ask for some nice soft, lightweight fabric for lining: cotton, viscose, polyester, silk even though I don't need lining at that exact moment - we all know what that means - making a stash!!) 


I carefully thought everything out and came to a conclusion that I don't need a side zipper (I am slightly lazy BUT I actually thought this to be a good idea). I realized that there is going to be enough space for me to pull it over my head, my bust and then it will sit on my hips. It's not bad, I wiggle in and out of this dress. The top part is stretchy. The skirt sits nicely. I lifted the neckline slightly (I sewed a few centimetres higher up for a modest neckline.)



I had to shorten the sleeves for 15 cm because I had just 2 m of the chiffon fabric. I also used less fabric for the skirt part than it was suggested in Burda magazine, again, because I had too little fabric. But it looks OK. There is so much fabric around my legs that I call it ˝my beautiful tent˝. It's nice to have a romantic maxi/ midi dress like that. It's probably a midi dress but I'm on the short side myself.



I completed the top part with the facing and then just carefully sewed the left and right half together by hand. And then I sewed cheap pearls (not buttons but pearls for making girls' bracelets) on the neckline. 

Overall look seems vintage too me but I am no expert on vintage, not even a big fan. Maybe it's the colour that makes it.






Pictures of the process:





Love it, love it:

Can you spot the dog?



As you can see from the millions of pictures I took that I really like this dress. I would love to make it in a soft flowery cotton (batist) or maybe viscose to wear it everyday (because this one doesn't look very everyday-ish). And I can sew a side zipper, I'm not a beginner. (And besides, I also discovered a way to take photos of myself without my husband.)



Attaching the skirt (2 layers) to the top part



I'm probably going to try a  no-zipper-thing again in the future (with stretch fabric of course). I like simplifying and experimenting. Oh, and one more useful tip I heard recently on YouTube: wear a maxi or a midi dress and you are: one-and-done; well, quickly dressed and ready to go and face the world. I would change it to ˝make yourself a maxi/ midi dress and you are one-and-done.˝



Tuesday, May 3, 2022

My Old Rose Canadian Smocking Cold-shoulder Top

I'm so excited, I just can't hide it, I'm about to lose control and I think I like it ...



Yep, I am really excited about this one. It's one of my uni-q-top ideas. It's a prototype and not at all bad for a prototype, I dare say. It could be waaay worse and it's not. It's wearable, it looks good, it's slightly sexy with that cold-shoulder style.


Our dog is excited too. It's great taking photos with him because he's so crazy and jumps and moves like a madman - a mad dog.
 

I found my inspiration, of course, where else than, on Pinterest. My inspiration was this:





This technique is called (CANADIAN) SMOCKING and is mainly used for making cushion covers. I love using something so specific for something more unusual (if you know what I mean). I really like the architectural construction of these patterns.

Very useful and simple YouTube video is the following: 

Only for cushions? - I don't think so.


I took a pattern from BurdaStyle 5/ 2019; mod. 124; size 44. I wanted it to be a simple sweater style with a slightly sexy touch.


Sewing process in pictures:
1. I always make a paper pattern carefully. 
I made the pattern for 10 cm wider (exactly in the middle) but forgot to make it about 10 cm longer - so I had to add the fabric at the bottom.

2. Drawing the grid: 3 cm x 3 cm (in my case). But first, taping it with masking tape to the table. I used blue tailor's chalk and very soft pencil (B- something) and a long ruler.






3. Draw the braid pattern in the grid. !!! Start at the bottom of the shirt and turn it upside down. (Otherwise the points of the braids will go down, not up. Well, try it on a piece of fabric.)




(MAKING MISTAKES: This picture is wrong  ↴ : you should start at the bottom of the shirt and turn it upside down.)
MAKING MISTAKES: I started doing it wrongly - you see that the points of the braids go down instead of up, so I quickly changed that when realizing my mistake.                                                                              ↴

4. The wrong side of the garment (the inside): I think that here we can see how much of extra fabric we have to add for 1 braid - 6 cm ?! I'm trying to use my maths skills, I'm not at all sure.

5. First panel is finished - the front part.

6. I haven't made the braids all the way up to the shoulder, I have actually done that after everything was finished - really, when the sweater was all finished, then I tied a couple of knots more - and it was great. (But draw/ mark everything beforehand because you cannot do marking later.)


7. Making the neckline - my usual way of making it. Too lazy to explain. I use a 4 cm wide and --- cm long band. I sew it on the front and then turn it over the edge and sew it in place with a twin needle.



8. Inserting a sleeve:

My findings (when making this garment) are the following:

❃ you have to calculate how much more fabric you need for making this kind of pattern - at least approximately - (for this I think that 70-75 % more - yep, a lot); 
(I admit I didn't calculate exactly. I used a pattern size 44 (I normally use size 40) and added 10 cm right in the middle of the front and back part and also the sleeve part. But as you see it was OK. But you know, the pattern of this sweater is anyway quite baggy.)

❃ the clothes should be loose - not tight (tight-fitting clothes would probably distort Canadian smocking pattern)

❃ making Canadian smocking is actually very, very easy BUT putting the smocked garment together is a more difficult part; let me re-pharase that: the most difficult part of this shirt were actually (as always) the finishing touches: making the neckline, inserting the sleeves,  finishing the sleeves, finishing the bottom edge etc. - those things that are always a bit more difficult to do.

❃ viscose jersey (a light one) works surprisingly well; it's easy to work with, and it stands/ looks great BUT look at my next point ↴

❃ How is it going to behave after washing? I have no idea. Are the knots going to hold the pressure? I have no idea. We'll see. Is the chalk and pencil drawing going to wash off? I hope so. I'll see all of these when I wash the sweater - it hasn't been washed yet.

❃ I drew a 3 cm x 3 cm grid. Drawing on viscose jersey was surprisingly easy. It didn't move. It didn't curl up. (It was so easy that I forgot to use masking tape for the last sleeve because I was hurrying and I noticed this only when I was half done.)

❃ I handstitched a lot of things before doing machine sewing, but that's really always my usual modus operandi. I handstitched all kinds of folds, because you get a lot of folds because of Canadian smocking. It is worth it - everything stays in place when you do the final machine sewing.

❃ Doing so much of Canadian smocking in one shirt might be an overkill :) . What do you think? I could do just the front or just the sleeves, or just the front and the back with normal sleeves. The variations are endless. 
--------

Gosh, this is a long post, but I am very excited about this topic. I plan to quit my job as a teacher because I'm kind of fed up with teaching after 14 years of doing it and I really want to just sew clothes for a living. I can't even imagine if anything like this is remotely possible. But I'm hopeful.



I got 1.3 m and it cost me 7.74 EUR. Not bad to get a sweater like this in the end.

Oh, the possibilities of smocking ... TO BE CONTINUED ...